We currently offer 2 types of dc-dc converters.
1) A switched capacitor converter designed to be used with 24V turn and slip indicators. In common with all switched capacitor type converters the output voltage is less than 24V when on load. This normally present no problems. This converter takes the form of a circuit board with mounting pillars to allow direct mounting on the back of large turn and slip indicators.
2) A switched inductor converter capable of producing
any output voltage upto 65V DC. Output current is dependant upon output
voltage and ranges from about 3 amps down to 1 amp at the higher output
voltages. The output voltage does not droop on load.
This converter is ideal for use with instruments which consume larger
currents, such as 14V or 28V DC artificial horizons, or 28VDC turn and
slip indicators. The converter is housed in a rugged diecast box with screw
locking connectors for the input and output leads. This converter is also
ideal for eliminating unreliable 14V batteries which are used solely for
powering 14VDC artificial horizons.