XLT 1.1 & E Series Programs & Adjustment Extacts *

Gives full details for four, very good, Inland Programs as well as 2, equally good Beach Programs. Includes full step by step instruction on how to install them.  Every adjustment for the XLT is explained, even Block Edit. What each adjustment does, when and why to adjust, together with step by step instructions on how to adjust - all are included!. Learn how to make adjustments in the field, how to let your detector tell you the Preamp Gain and A.C. Sensitivity for any site you are on.  Understanding adjustments and appreciating their usage is the same, and is equally as important, in the UK as it is in Europe, the United States of America and the rest of the world!
This book WILL make your detecting experience far more rewarding!

                                                                                     EXTRACTS FROM THE XLT 1.1 & E Series BOOK

 Setting Discrim With Block Edit! To save any adjustments made in Discrim Edit they must be done in a Custom Program. To edit Discrim from the detector Off position, first press the On button once, then wait and let the detector go through the Whites and Battery Check screens, into the Main menu PG. 1/1 screen with flashing arrow opposite Preset Programs.  Press the Enter button once to bring up the screen showing Programs PG. 1/3 with flashing arrow opposite Coins. Press the Down Arrow three times to bring up the screen showing Programs PG. 2/3 with flashing arrow opposite Relic. Press the Down Arrow button between two and five times, to move the flashing arrow opposite Custom or Basic 1, 2, 3, or 4, if installed.  Press the Enter button once to bring up the screen showing C.P. Options PG. 1/1 with flashing arrow opposite Load.  Press the Enter button once to bring up the Ground Balance instruction-screen. Press the Menu button twice to bring up the screen showing Main menu PG. 1/1 with flashing arrow opposite Preset Programs.  Press the Down Arrow button twice to move the flashing arrow opposite Pro Options.  Press the Enter button once to bring up the screen showing Pro Options PG. 1/2 with flashing arrow opposite Audio.  Press the Down Arrow button twice to move the flashing arrow opposite Discrimination.  Now move to the next paragraph for the second part of single edit, or skip a paragraph to go to the second part of block edit.
Press the Down Arrow button once to bring up the screen with Block Edit boxed. Press the Enter button once to move the box around the numbers.  Then, to adjust Discrim using this facility, press the Down Arrow button and hold it down to scroll through the numbers until -95 is displayed.  If the tick is in the Accept box, press the Enter button once to move it to the Reject box. If the tick is in the Reject box, just press the Up Arrow button and hold it down to scroll back through the numbers until -40 is displayed. Press the Enter button once to move the tick to the Accept box.  Press the Up Arrow button and hold it down to continue scrolling through the numbers until -2 is displayed. Press the Enter button once to move the tick to the Reject box.  Press the Up Arrow button and hold it down, to continue scrolling through the numbers until +10, is displayed.  Press the Enter button once to move the tick to the Accept box.
Press the Up Arrow button and hold it down to continue scrolling through the numbers until +95, is displayed.  Press the Enter button once, to move the tick to the Reject box.  The Discrimination circuitry on your XLT will now Reject all the numbers from -95 to -41 and from -2 to +9 and +95.  It will Accept all the numbers from -40 to -3 and from +10 to +94.  Press the Menu button once to move the box back around Block Edit. These settings are only an example. It is always best to practice making any Block Edit adjustments in the Relic Program first until you are confident about making them in a Custom Program. To save the programs, see the paragraphs at the end of each set of Basic and Beach Programs installation instructions.