High purity Silver
The best wires we know of

KCK200

Here is a nice upgrade for bi-wirable loudspeakers used with just one set of cables. Replacing the metal jumpers which connect the two terminals is very effective. The jumpers are made from 99.99% Silver CZAR KCK10000 with Cap29 spade terminals. These are supplied as two pairs (4) of 12.5cm length and are direct replacements for the horrendous items provided by the manufacturers. Now you can replace brass or even tin connectors with high purity silver. A simple and highly satisfying upgrade. Made in the UK.

Silver plated Oxygen Free Copper with PTFE
The next best thing to pure Silver

High Purity 99.99% Silver Plated Oxygen Free Copper of 57/0.45mm (overall diameter of 9.92mm) with PTFE. A full bandwidth or bass/midrange loudspeaker cable with the power to reproduce the full dynamic impact of live or studio recorded music. This is a low distortion and low capacitance cable providing improved sound staging and a significantly easier load for amplifiers to drive. Supplied terminated in stereo pairs. Where weight, power and finesse is required. Made in the UK.

SCLl000 pictureHI-FI NEWS AWARDS 2003 EDITORS CHOICE

When we first embarked upon the odyssey of developing this cable back in 1991 we had no idea how successful or copied it would become. 99.99% Silver Plated Oxygen Free Copper strands with PTFE of 19/0.45mm (overall diameter of 3.31mm, AWG12) with practically zero loss over even very long runs. Resistance at 330m is just 2.06 Ohms! Possessing much the same qualities as SCL500 but designed for full bandwidth reproduction or as a partner to it (or KCK600) for bass/midrange signals in a bi-wire/amp setup. As with SCL500, it is supplied in terminated stereo pairs or as individual wires. Made in the UK.

SCLl000 JUMPERS pictureHI-FI NEWS AWARDS 2003 EDITORS CHOICE

For bi-wire loudspeakers used with only one set of loudspeaker cables. Substantially upgrades the brass links usually used. 12.5cm long, sold as a set of four with spade terminations. Made in the UK.

SCL500 picture

99.99% High purity Silver plated Oxygen Free Copper 1/0.6mm, (overall diameter 1.20mm, AWG23) with PTFE. This wire is just thick enough to avoid the skin effect (a well documented and understood phenomenon whereby high frequency signals progressively concentrate at the periphery of the conductor, producing a smeared aggressive sound in thicker cables- and you thought it was your tweeters! Perfect as a tweeter cable in a bi-wire/amp setup or for rewiring loudspeakers or other electronics. Made in the UK.

Prevents RF noise pickup by loudspeaker cables
Results in an increase in overall transparency

These devices are fitted across the loudspeaker terminals to relieve the loudspeaker system of ultra high frequency energy. They make an astonishing difference improving image depth. They remove "fuzz" or "ringing" which masks subtle and delicate ambient decay. A must for any high resolution system.

Supplied as a pair. If you bi-wire/bi-amp you need a second pair. If, however, you only want to use one pair - fit them to the tweeter (high frequency) terminals.