Written by Richard Baker
Richard's Home Page
Order NOW
New for August 2000
Convert-X [Issue 3.00] : Units added : m kgf/s, metric hp (ch, PS, CV) : cm/min, m/min, in/min, ft/min
New Program : Series / Parallel (Resistors ,Capacitors, Inductors, Resonance, rms)
Convert-X (Metric Imperial SI Conversions)
Over 1500 conversions, simple to use and totally accurate to the number of places displayed.

Mass, Length, Volume, Pressure, Temperature, Force, Torque, Velocity, Acceleration, Force Unit/Length, Area, Density, Energy, Power, Flow Rate (volume and mass), Specific Energy, Mass/Mass, Specific Volume, Fuel Consumption, Viscosity (dynamic and kinematic), Magnetic Flux Density, Frequency - Period, Plane Angle, Illuminance, Luminance, Moment of Inertia, Momentum, Angular Momentum, Second Moment of Area, Section Modulus and Angular Velocity.

  • The Download is 475K bytes and so will take a few minutes.
  • Unzip the file to a floppy disk or a blank directory and then run setup.exe.

    Click here to Download Convert-X « convertx.zip »


    Listing Calculator + VAT Calculator (New for March 2000)
    Produces a running list of the calculations performed. Plus a VAT calculator to find the VAT from the nett or gross.
    VAT rate can be changed and stored. The list can be copied to the clipboard and then printed.

  • The Download is 339K bytes and so will take a few minutes.
  • Unzip the file to a floppy disk or a blank directory and then run setup.exe.

    Click here to Download List Calculator « listcalc.zip » (Full installable program)

    If you already have Convert-X you can Download the main program files (11K bytes) and unzip them to the C:\CONVERTX directory

    Click here to Download EXE and INI files « lc_files.zip » (Create an ICON or shortcut to LISTCALC.EXE)


    International Standard Atmosphere
    Displays Temperature, Pressure, Density, Viscosity and Velocity of Sound for a given Altitude or Altitude for a given Pressure.
    Units: K °C °F °R ; m ft ; kg/m³ slug/ft³ lb/ft³ ; Pa lb/ft² lb/in² ; m/s ft/s mph km/h knot ; ...... etc.

  • The Download is 450K bytes and so will take a few minutes.
  • Unzip the file to a floppy disk or a blank directory and then run setup.exe.

    Click here to Download ISA « isa_see.zip »
    You can also download this program from the Society of Environmental Engineers (SEE) website http://www.environmental.org.uk


    Plate Resonance Program
    This is an add on program for VIBKIT 98. You will require VIBKIT 98 to run it!
    The program will calculate the resonant frequency of a rectangular or triangular plate which is supported on 1, 2, 3 or 4 sides.

  • The Download is 35K bytes and so will take only a few seconds.
  • Unzip the file to the directory which contains VIBKIT 98 (default is C:\VIBKIT98).
  • Create an ICON or shortcut to PLATE.EXE.

    Click here to Download Plate Resonance « plate98.zip »


    VIBKIT 98 Demo
    The demo disk contains one free program (Sine System Performance) and information on all the other programs in VIBKIT 98.
    Plus a Quiz on Vibration Testing.

  • The Download is 658K bytes and so will take a few minutes.
  • Unzip the file to a floppy disk or a blank directory and then run setup.exe.

    Click here to Download VIBKIT 98 Demo « vk98demo.zip »


    DVC 4000 Sine / Random / Transient Export
    These 3 programs will read the SIN, RAN and TRN files created by the DVC 4000 controller and export them to an ASCII file.
    The data can also be displayed and copied to the clipboard

  • The Download is 490K bytes and so will take a few minutes.
  • Unzip the file to a floppy disk or a blank directory and then run setup.exe.

    Click here to Download DVC 4000 Export « dvc_exp.zip »


    Series - Parallel Components Program
    This is an add on program for VIBKIT 98. You will require VIBKIT 98 to run it!
    The program will calculate up to 6 Resistors, Capacitors or Inductors in series or parallel. The program will also calculate the combined resonance of a structure using Dunkerly's Equation plus a "Root Mean Square Sum".

  • The Download is 20K bytes and so will take only a few seconds.
  • Unzip the file to the directory which contains VIBKIT 98 (default is C:\VIBKIT98).
  • Create an ICON or shortcut to RCLF.EXE.

    Click here to Download Series - Parallel « rclf.zip »


    Vibration Test Engineer' Tool Kit   Main menu   Home page