Height 1905 mm 75 in
Width 537 mm 21.2 in
Depth 825 mm 32.5 in
|
LDS SPA-K Amplifier
Height 1905 mm 75 in Width 537 mm 21.2 in Depth 825 mm 32.5 in
|
| Power Range | 5 - 50 kVA in 5 kVA increments |
| Total Harmonic Distortion | Typically 0.1% when measured into a matched resistive load a rated output |
| Input Impedance | 10k ohm nominal |
| Input Sensitivity | 1V rms for 100V rms output (Differential Input) Compatible with all standard controllers |
| Signal to Noise Ratio | >68 dB |
| Amplifier Efficiency | >90% |
| Switching Frequency | 150 kHz |
| Modulation Range | d.c. to 5 kHz |
| Rated Output Voltage | 100V rms (sine) |
| Continuous Output Current | <>50A rms (sine and random) per 5 kVA increment |
| Transient Output Current | 150A for 100 ms per 5 kVA increment |
| Full Power Bandwidth | 20 Hz to 5 kHz |
| Module Efficiency | 93% |
| Safety | Complies with the essential health and safety requirements of the Machine Directive 89/392/EEC and the Low Voltage Directive 73/23/EEC |