Australian Cortina Reference Details
Consul Cortina (CB & CE) Models
CB details 11/62 / 65/3
| Model Code | Description | Engine Size | Tyre Size | Axle Ratio | Body Type |
| 28112 | 2-door DeLuxe | 1200cc | 5.20 X 13 | 4.125 : 1 | 70 A |
| 28132 | 2-door DeLuxe | 1500 | 5.60 X 13 | 3.9 | 70 B |
| 28212 | 4-door DeLuxe * | 1200 | 5.20 X 13 | 4.125 | 73 C |
| 28232 | 4-door DeLuxe * | 1500 | 5.60 X 13 | 3.9 | 73 D |
| 28312 | 4-door DeLuxe | 1200 | 5.20 X 13 | 4.125 | 73 A |
| 28332 | 4-door DeLuxe | 1500 | 5.60 X 13 | 3.9 | 73 B |
| 27132 | 2-door G.T. | 1500 | 5.60 X 13 | 3.9 | GT A |
| 27232 | 4-door G.T. | 1500 | 5.60 X 13 | 3.9 | GT B |
* = With bucket seats
Consul Cortina CE Model Reference 65/3 --
| Model Code | Description | Engine Size | Tyre Size | Axle Ratio | Body Type |
| 28014 | 2-door Standard 220 | 1200cc | 5.20 X 13 | 4.4 : 1 | 70 C |
| 28034 | 2-door Standard 220 | 1500 | 5.60 X 13 | 4.125 | 70 D |
| 28114 | 2-door DeLuxe 240 | 1200 | 5.20 X 13 | 4.44 | 70 A |
| 28134 | 2-door DeLuxe 240 | 1500 | 5.60 X 13 | 4.125 | 70 B |
| 28214 | 4-door DeLuxe * 440 | 1200 | 5.20 X 13 | 4.44 | 73 C |
| 28234 | 4-door DeLuxe * 440 | 1500 | 5.60 X 13 | 4.125 | 73 D |
| 28314 | 4-door DeLuxe 440 | 1200 | 5.20 X 13 | 4.44 | 73 A |
| 28334 | 4-door DeLuxe 440 | 1500 | 5.60 X 13 | 4.125 | 73 B |
| 28344 | 4-door DeLuxe Auto | 1500 | 5.60 X 13 | 4.125 | 73 E |
| 27234 | 4-door G.T | 1500 | 5.60 X 13 | 3.9 | GT B |
| 27134 | 2-door G.T. | 1500 | 5.60 X 13 | 3.9 | GT 500 |
* = With bucket seats
The following table gives Parts Listings for the Australian GT 500 (dated May 1965)
| Description of Part | Part Number | Comments / Number required |
| Scoop assy - air R.H. | AR 118E 2B010 G | 1 |
| Scoop assy - air L. H. | AR 118E 2B011 G | 1 |
| Kit - brake pad | AR 118E 2 K021 A | 1 |
| Kit - brake linings and rivets | AR 118E 2097 A | 1 |
| Resonator & pipe assy - front | AR 118E 5230 G | 1 |
| Spring assy - front | AR 118E 5310 A | 2 |
| Spring assy - rear | AR 120 E 5560 B | 2 |
| Gasket - cylinder head | 105E 6051 B | 1 |
| Cylinder Head | AR116E 6085 A | 1 - Head was modified. Exact spec not known ?? ?? Can you supply a sketch or spec ?? ?? PLEASE!! |
| Bolt, connecting rod | AR 116E 6215 | 8 |
| Plate - connecting rod, locking | AR 116E 6216 | 8 |
| Camshaft | AR 116E 6250 | 1 Modified see Ford cams here |
| Connecting Rod - bearing kit | AR E 176 Z 1 | 1 kit |
| Pulley - crankshaft | AR 105E 6312 A | 1 |
| Flywheel & ring gear assy | AR116E 6398 A | 1 Flywheel was lightened and balanced - exact spec not known ?? ?? |
| Valve spring - inner | AR 109E 6513 A | 8 |
| Seal, valve stem | AR 105E 6571 A | 8 |
| Pump assy - oil | AR 116E 6600 A | 1 Spacer/washer fitted to increase pressure by 10 psi. See below |
| Washer - oil pump relief valve | AR 116E 6A600 A | 1 |
| Transmission & extension assy | AR116E 7003 A | 1 |
| Gear - main drive | 7961 V 2 | 1 |
| Gear, trans 2nd speed | 7961 V 3 | 1 |
| Gear trans - countershaft | 7961 V 1 | 1 |
| Gear trans 3rd speed | 7961 V 4 | 1 |
| Restrictor - water outlet | AR 116E 8A575 A | 1 PLEASE -- someone give me a spec for this item ??
??
Paul Treleaven, Melbourne
Australia, reports:-
a piece of inner tube with a 3/4" hole
in the middle was used. The trick was to leave the water in the radiator
long enough to cool, and in the motor long enough to take up the heat. As
the rpm/pressure comes up the hole gets bigger
|
| Tank assy - fuel | AR 118E 9003 G | 1 |
| Tank assy - fuel auxiliary | AR118E 9003 E | 1 |
| Pipe - fuel tank connecting | AR118 E 9A041 G | 1 |
| Hose - fuel tank filler | AR118E 9047 E | 2 |
| Hose - auxiliary tank to main tank | AR118E 9047 E | 1 |
| Strap - auxiliary fuel tank | AR118 E 9054 G | 2 |
| Support - auxiliary fuel tank | AR118 E 9A062 G | 2 |
| Grommet - fuel tank filler pipe | AR 118E 9083 G | 2 |
| Vent - fuel tank | AR 118E 9101 G | 1 |
| Clamp - hose fuel tank | 120E 9107 | |
| Cap assy - auxiliary fuel tank | 120E 9142 G | 2 |
| Inlet manifold | AR 116E 9425 A | 1 |
| Carburettor assy | AR118 E 9510 A | 1 |
| Primary main jet - 145 | AR 116 E 9533 A | 1 |
| Secondary main jet - 160 | AR 116 E 9533 B | 1 |
| Primary choke tube - 27 | AR 116E 9E514 A | 1 |
| Secondary choke tube - 29 | AR 116E 9E514 B | 1 |
| Primary emulsioning tube | AR 116E 9991 A | 1 |
| Secondary emulsioning tube | AR 116E 9991 B | 1 |
| Panel, fuel filler cowl | AR118 E 11310 G | 1 |
| Wire assy - spark plug 1 & 2 | AR 116E 12282 | 2 |
| Wire assy - spark plug 3 | AR 116 E 12284 | 1 |
| Wire assy - spark plug 4 | AR 116 E 12285 | 1 |
| Wire assy distributor to coil - HT | AR 116 E 14303 A | 1 |
| Shock absorber - rear | 118 E 18080 B | 2 |
| Bolt, generator mounting bracket | AR 304684 S | 2 |
| Plate - quarter panel ind "500" | AR118 E 70 29098 A | 2 |
| Hinge - luggage compt door | AR118 E 70 42700 G | 1 |
| Stop hinge luggage compt door | AR 118 E 70 427A06 G | 1 |
If you can supply any data about the items marked, please e-mail me! But don't ask me questions, because all I know is already here!
Click here to return to the Welcome Page
Click here to go to the Databook
Page last edited:- 19 May, 2006